Lucky you live Hawaii! Welcome to Corrosion COPS web page and thanks for investing a few minutes of your time to read this.
Hawaii
is situated within a DoD corrosion zone 4 region. Regions with 1-4
ratings showing 4 the highest corrosion or most difficult for metals to
survive their design life.

Chlorides
(salt) are known to accelerate corrosion so we are dealing with
chlorides everyday with our island lifestyle. Results of high surf
visits some of the remotest locations in the center of our islands as
the chlorides combined with our natural tradewinds can travel up to 35
miles inland.
The chlorides form an easy path for condensation
to form. As an example, in our island homes and eateries salt shakers,
a few grains of rice are mixed with the table salt. The reason is that
the rice absorbs the moisture that salt attracts to keep the salt
flowing.
Chlorides also work to form a bridge or path for the
deposits of the spent or consumed metal to travel upon. Various colored
oxide deposits with tell tale build up of fine grit or soft to coarse
bubbling mounds of deposits form on the solution of chlorides moisture
with oxygen at the hot corrosion cell. Heavily scaled oxides on carbon
based steel characteristically look like over-sized and thick potato
chips. With the concentrations of chloride and moisture being held at
the good substrate or below the corrosion oxide deposits, these
deposits of rust oxides add more fuel to the charged corrosion cell as
the moisture is held in suspension and works to combine with the
chlorides to keep the corrosion cell highly active. BOTTOM LINE - RUST!
Since
the corrosion cell works like a battery operated device which allows
free movement of electrons to pass over the surface of metal, the
energy that was used to manufacture the metal in the form of heat, is
slowly released back into the environment while consuming the metal in
the form of corrosion and rust.
The results of corrosion affect
all of us in various way, a most recent study has shown that corrosion
is a $297 billion dollar problem in the USA.
With possible
potential for property loss, downtime or worse, litigation for
postponing or ignoring problems that could result in claim for
liability, these situations can be avoided. Cost avoidance from the
effects of a sound corrosion prevention system is a factor that works
to insure a positive impact to your bottom line. Federal government
studies have shown that for $1 invested in corrosion prevention,
results in $23 savings in cost avoidance. Spend it now or spend MORE
later.
Please take a few moments to link our site to your favored web pages to use as a resource for our services and current or future projects. If time is not on your side for investigation, please contact us and tell us how we can help.
Our goal is to provide you with solutions and products for corrosion and rust with cleaner and safer alternatives to what you are currently using for your projects.
CORROSION COPS (808) 676-1963