Rust & Corrosion Prevention that works in Harsh Tropical Island Environments!     When It's Rust...Call Us!

(808) 676-1963

94-463 Alapine Street, Waipahu, HI 96797

(808) 676-1963

Buy America

Made in USA

Products - VpCI®-101

Product Description

VpCI®-101 devices are designed to provide corrosion protection for metal

components and parts enclosed in non-ventilated control boxes, cabinets,

or tool boxes. A VpCI®-101 device protects up to 1 cubic foot (28 liters) in

volume.VpCI®-101 is a small patented device from which Vapor phase

Corrosion Inhibitors (VpCI®s) are slowly released. The VpCI®s emit vapors

that form a molecular layer on metal surfaces to protect critical, complex,

and expensive electronic equipment and other metal components during

operations, shipping, or storage. VpCI®-101 provides long-term protection

against corrosion even in the presence of adverse conditions including salt,

moisture, airborne contaminants, H2S, SO2, NH3, and others.

• Economical to use
• Convenient to install
• Provides continuous protection up to 24 months during operation and/or shutdown
• Effective in polluted and humid environments
• Does not interfere with electrical, optical, or mechanical performance
• Multimetal protection
• Quick and easy installation
• Non-toxic and safe to handle
• Compact and space-saving
• Free of nitrites, silicones, and phosphates
• No spraying, wiping, or dipping required
• Self-stick back
• Self-stick date label
• Accepted by Canadian Food Inspection Agency for indirect food contact
• Meets Southern California Clean Air Act and other National and local regulations
• NSN* #6850-01-338-1392
• Meets MIL-PRF-81705D

• Operating, packaged, and stored electrical equipment
• Marine navigation and communication equipment
• Aerospace electrical controls
• Electric motors
• Switching equipment
• Fuse boxes and power boxes
• Medical equipment
• Electrical wire ways and terminal boxes
• Scientific and measuring instruments
• Telecommunications equipment and remote electronic devices
• Hand-held battery-operated devices
• Tool boxes, parts storage, and other containers holding metals

How to Use

VpCI®-101 devices are extremely simple and convenient to install. The devices should be installed at the earliest possible time, preferably during manufacturing or assembly.

Simply select a space within any enclosure where corrosion protection would be useful. Verify the surface the device will be affixed is clean and free of debris. Peel off the

protective peel strip from the bottom of VpCI®-101 device and attach it to the clean surface. VpCI®-101 devices can be installed in any position. For volumes greater than 1 cubic foot (28 liters) use more than one device. If the enclosure is not totally airtight, or if the access doors are opened frequently, replace the VpCI®-101 device more often than every 2 years. After periods of heavy maintenance replace the device.

For additional protection spray the enclosure very lightly with Cortec® ElectriCorr®

VpCI®-238 or VpCI®-239.

Go to Contact for industrial sales and other inquires.