VpCI®-396 is a high solids aromatic moisture cure urethane that is a direct to metal primer for multimetal protection. VpCI®-396 should be top coated with an aliphatic urethane top coat for best results. In addition to the outstanding barrier protection,VpCI®-396 also contains contact corrosion inhibitors for additional protection. VpCI®-396 is suitable for immersed structures when applied over VpCI® CorrVerter for marginally prepared surfaces; such as ballast tanks, storage tanks, or holding tanks containing hydrocarbons to high salinity solutions.
VpCI®-396 forms a very hard, but flexible coating that cures in the presence of moisture in the air. For best results the curing conditions required are a relative humidity between 20% and 80% with temperatures above 32F and below 120F .
• Single component package
• Can be coated at a relative humidity up to 80%
• Can be applied at low temperatures
• Excellent adhesion
• High solids
• Cast iron
• Galvanized steel**
** A wash primer such as VpCI®-373 applied at 0.5-1.0 mils (12.5-25 microns) is
recommended before applying the VpCI®-396 to these substrates.
• Structural steel
• Storage tanks
• Ballast tanks or ships
Local and Worldwide Projects utilizing Cortec® VpCI® High Performance Coatings
Go to Contact for industrial sales and other inquires.
94-463 Alapine Street, Waipahu, HI 96797
Made in USA
Rust & Corrosion Prevention that works in Harsh Tropical Island Environments! When It's Rust...Call Us!